NEWS

新闻资讯

  • 灯光护栏如何施工
  • 本站编辑:杭州楷高实业有限公司发布日期:2020-01-05 08:31 浏览次数:

灯光护栏一般情况下是选择优质的盘条制作的,使用的是拉出来的成品丝进行加工处理;灯光护栏的工艺是进行焊接或编制,灯光护栏的质量主要是看技术人员的熟练程度,还有就是生产机械的操作能力的好坏,所以一个好的灯光护栏就是每一个焊接都非常的牢固,并且灯光护栏的编制点都能够非常好的进行连接;灯光护栏的框架的选材也非常的好,一般情况下应选用优质的角钢与圆钢进行加工,因此灯光护栏的口碑是十分好的。灯光护栏特点:这个的立柱是采用混凝土烧的筑件,其工程的成本相对来说是比较低的。

  灯光护栏一定要采用优质低碳钢丝由钢丝焊接而成,如果用其它细铁丝来焊接质量就没保障了.对于护栏网的表面处理也很重要、一定要做好浸塑防止生锈。近几年,国内很多地方都把护栏网作围墙来使用,一般来说护栏网用处多,用于市政绿地、道路、机场、港口绿地围栏,铁路封闭网 、高速公路封闭网、场区围栏、小区护栏、隔离与防护。灯光护栏产品规格:高1.8米、2.0米, 长3米(柱中) 网孔7厘米 17厘米。为了增强产品的抗腐蚀能力一般都要进行表面处理,表面钢丝镀锌,上锌量270克/平方米,然后再进行热浸塑处理,要求涂层均匀光滑,颜色一致。

  灯光护栏的安装比较严格,其主要工程内容是对立柱和网片的安装,在进行灯光护栏的安装之前,就要将灯光护栏的网片和立柱运到施工现场,于此同时,施工单位要向监理工程师提交产品合格证书及相关资料,监理人员有权利对有质量问题的灯光护栏网片及立柱进行检测。同时监理人员应该对运到施工现场的金属立柱的弯曲程度进行检测,对变形交明显,划伤及存在卷边问题的金属立柱清除。铁路防护栅栏一般都采用的是框架式防护栅栏。框架式防护栅栏具有美观耐用、不变形、安装便捷等特点 ,是一种较为理想的金属网墙。

  灯光护栏相关施工单位应该按批准的施工方案和设计图纸要求放出标准中间线,同时将施工现在进行清理,确保灯光护栏安装完毕后的美观及流畅。基础混凝土浇筑前,基坑的尺寸、以及基坑间间距,必须经监理工程师检验认可,方可进行混凝土浇筑。灯光护栏立柱在安装过程中一定要确保立柱的稳固,以及和基础的连接紧密,必要时可安设支撑来稳固立柱。立柱安装过程中应用小线对立柱安装的顺直度进行检测,对局部进行调整。确保直线段直顺,曲线段圆滑。立柱埋深要符合设计图纸要求。立柱施工完毕后,监理工程师要对立柱的线形、埋深、高度进行检测,以及和基础连接的稳固性进行检测。符合要求后,方可进行挂网施工。

In general, the Lighting Guard rail is made of high-quality wire rods, which are drawn out and processed. The Lighting Guard rail is made by welding or weaving, the quality of the lighting guardrail mainly depends on the proficiency of the technical personnel, as well as the operating ability of the production machinery. Therefore, a good lighting guardrail is that every welding is very solid, and the preparation points of the light guardrail can be connected very well; the material selection of the light guardrail frame is also very good, in general, high-quality angle steel and round steel should be selected for processing, so the reputation of the light barrier is very good. Lighting Guardrail Features: This column is the use of concrete burning building parts, the cost of the project is relatively low. Light Guardrail must be made of high-quality low-carbon steel wire welded by wire, if other thin wire to welding quality is not guaranteed. For the fence surface treatment is also very important, must do a good job to prevent rusting dip. In recent years, many places in China have used the guardrail net as a fence. Generally speaking, the guardrail net is used for many purposes, such as the fencing of municipal green space, roads, airports and harbors, railway closed network, highway closed network, field fence, residential fence, isolation and protection. Lighting guardrail product specification: 1.8 m high, 2.0 m long 3 m column Mesh 7 cm 17 cm. In order to enhance the corrosion resistance of products generally have to be surface treatment, the surface of steel wire galvanized, zinc on 270 grams / square meters, and then hot-dip treatment, coating uniform smooth, color consistent. The installation of the lighting guardrail is quite strict. Its main project content is the installation of the columns and the net pieces. Before the installation of the lighting guardrail, the net pieces and the columns of the lighting guardrail must be transported to the construction site. At the same time, the construction unit shall submit the product qualification certificate and Related Materials to the supervision engineer, and the supervision personnel shall have the right to inspect the lighting guardrail net and column with quality problems. At the same time, the supervisor should check the bending degree of the metal column which is transported to the construction site, clear the metal column which has obvious deformation, scratch and the problem of curling. The railway protective fence generally adopts the frame type protective fence. The frame-type protective fence is a kind of ideal metal net wall, which has the characteristics of beautiful and durable, no deformation, convenient installation and so on. The Light Guardrail Related Construction Unit should release the standard Middle Line according to the approved construction plan and the design drawings, and clean up the construction now to ensure the beauty and fluency after the light guardrail installation. Before the foundation concrete is poured, the size of the foundation pit and the spacing between the foundation pits must be checked and approved by the supervision engineer before concrete is poured. Lighting Guardrail column in the installation process must ensure that the column of stability, and the foundation of the close connection, if necessary, can be installed support to stabilize the column. In the process of column installation, small wires are used to measure the straightness of column installation and adjust the part. Make sure the straight line segment is straight and the curve segment is smooth. The buried depth of the column should meet the requirements of the design drawings. After the completion of the column construction, the supervision engineer should check the column alignment, depth, height, and the stability of the foundation connection. After meeting the requirements, can be linked to the network construction.